|
| Standard Packaging: | carton box |
| Delivery Period: | 5-8 work days |
| Payment Method: | T/T, Western Union |
| Supply Capacity: | 50000pcs per month |
3D Multilayer Zirconia Blocks Dental 5 Layers Plus 1200HV Hardness
9-layer (5 layers plus 4transition layers) zirconia with increased translucency in the incisal area and high bending strength
( ≥ 1100 MPa) for anterior- or posterior teeth restorations with up to 14 units. In the production process, 5 layers of pre-coloured
zirconia are layered on top of each other, building 4 transition layers in the process.
The result is an extremely natural colour transition for vivid, lively restorations.
Isostatically pressed with a lifetime warranty.
The Facts
Zirconia Block Introduction
Yucera zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp
3D Multilayer Plus Zirconia Block
* Pre-shaded technics
* Multilayer color
* Without post dyeing process
* Suitable for full crown, bridge, anterior, inlay, onlay and implant
Product Features
♠ 6 layers Multilayer color
♠ From 43% to 57% gradient for transparency
♠ Strength shows gradient from 700 Mpa to 1050 Mpa
♠ Suitable for anterior, crown, 7 unit bridges and all restoration
Indication:
Crown /Inlay /Onlay /Implant /Anterior
| Physical Characteristics |
| Sintered density 6.07±0.01g/cm³ |
| Bending Strength 1200 MPa |
| Transmittance 43% |
| Hardness 1200HV |
|
Sintering temperature 1480~1550℃/recommend 1530℃ |
HT/ST Sintering Curve (1-5)
| HT/ST Sintering Curve (1-5) | ||||
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 300 | 30 | 9.3 |
| Step 2 | 300 | 1200 | 150 | 6 |
| Step 3 | 1200 | 1530 | 110 | 3 |
| Step 4 | 1530 | 1530 | 120 | 0 |
| Step 5 | 1530 | 800 | 100 | -7.3 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
HT/ST Sintering Curve (10 units)
| HT/ST Sintering Curve (10 units) | ||||
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 300 | 30 | 9.3 |
| Step 2 | 300 | 1200 | 190 | 4.7 |
| Step 3 | 1200 | 1530 | 150 | 2.2 |
| Step 4 | 1530 | 1530 | 120 | 0 |
| Step 5 | 1530 | 800 | 120 | -6 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
Technical team
Yurucheng has a strong professional technical team, 60% of its members are senior professional biological experts and intelligent CNC experts. Also, Yurucheng cooperate with many famous Chinese institutes to introduce advanced production technology from home and abroad.
International cooperation
Yurucheng establish cooperation with many large denture processing center and oral hospitals, get outstanding performance in the field and earn good reputation amount technicians and patients.
Product&equipment
Our main products are ceramic denture zirconia block, corresponding CAD/CAM equipment, 3D printing equipment and other related dental products. As professional oral materials supplier, we can provide digital dental materials, dental equipment, and full range of digital products and services.
Zirconia Features
Zirconium dioxide all-ceramic tooth is a high-tech cosmetic restoration method developed in recent years. It is made through computer-aided design, laser scanning, and grinding by computer programs.
It has a good translucent appearance, high density and strength, which can solve the problem that the all-ceramic system cannot be used as a long bridge. All-ceramic teeth have the characteristics of perfect tight edges, no gingival inflammation, no blocking of X-rays, etc., and their biocompatibility is better than that of various metal crowns, and they can get a long-lasting clinical restoration effect.
Our service
1,Yucera establish cooperation with many large denture processing center and oral hospitals, get outstanding performance in the field and earn good reputation amount technicians and patients.
2, We have already passed the CE and ISO certification.
I’m sure that our factory is good enough for your program in your market.
Welcome any comments.
Video
Video
Video
Video
Video
|
|
| Standard Packaging: | carton box |
| Delivery Period: | 5-8 work days |
| Payment Method: | T/T, Western Union |
| Supply Capacity: | 50000pcs per month |
3D Multilayer Zirconia Blocks Dental 5 Layers Plus 1200HV Hardness
9-layer (5 layers plus 4transition layers) zirconia with increased translucency in the incisal area and high bending strength
( ≥ 1100 MPa) for anterior- or posterior teeth restorations with up to 14 units. In the production process, 5 layers of pre-coloured
zirconia are layered on top of each other, building 4 transition layers in the process.
The result is an extremely natural colour transition for vivid, lively restorations.
Isostatically pressed with a lifetime warranty.
The Facts
Zirconia Block Introduction
Yucera zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp
3D Multilayer Plus Zirconia Block
* Pre-shaded technics
* Multilayer color
* Without post dyeing process
* Suitable for full crown, bridge, anterior, inlay, onlay and implant
Product Features
♠ 6 layers Multilayer color
♠ From 43% to 57% gradient for transparency
♠ Strength shows gradient from 700 Mpa to 1050 Mpa
♠ Suitable for anterior, crown, 7 unit bridges and all restoration
Indication:
Crown /Inlay /Onlay /Implant /Anterior
| Physical Characteristics |
| Sintered density 6.07±0.01g/cm³ |
| Bending Strength 1200 MPa |
| Transmittance 43% |
| Hardness 1200HV |
|
Sintering temperature 1480~1550℃/recommend 1530℃ |
HT/ST Sintering Curve (1-5)
| HT/ST Sintering Curve (1-5) | ||||
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 300 | 30 | 9.3 |
| Step 2 | 300 | 1200 | 150 | 6 |
| Step 3 | 1200 | 1530 | 110 | 3 |
| Step 4 | 1530 | 1530 | 120 | 0 |
| Step 5 | 1530 | 800 | 100 | -7.3 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
HT/ST Sintering Curve (10 units)
| HT/ST Sintering Curve (10 units) | ||||
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 300 | 30 | 9.3 |
| Step 2 | 300 | 1200 | 190 | 4.7 |
| Step 3 | 1200 | 1530 | 150 | 2.2 |
| Step 4 | 1530 | 1530 | 120 | 0 |
| Step 5 | 1530 | 800 | 120 | -6 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
Technical team
Yurucheng has a strong professional technical team, 60% of its members are senior professional biological experts and intelligent CNC experts. Also, Yurucheng cooperate with many famous Chinese institutes to introduce advanced production technology from home and abroad.
International cooperation
Yurucheng establish cooperation with many large denture processing center and oral hospitals, get outstanding performance in the field and earn good reputation amount technicians and patients.
Product&equipment
Our main products are ceramic denture zirconia block, corresponding CAD/CAM equipment, 3D printing equipment and other related dental products. As professional oral materials supplier, we can provide digital dental materials, dental equipment, and full range of digital products and services.
Zirconia Features
Zirconium dioxide all-ceramic tooth is a high-tech cosmetic restoration method developed in recent years. It is made through computer-aided design, laser scanning, and grinding by computer programs.
It has a good translucent appearance, high density and strength, which can solve the problem that the all-ceramic system cannot be used as a long bridge. All-ceramic teeth have the characteristics of perfect tight edges, no gingival inflammation, no blocking of X-rays, etc., and their biocompatibility is better than that of various metal crowns, and they can get a long-lasting clinical restoration effect.
Our service
1,Yucera establish cooperation with many large denture processing center and oral hospitals, get outstanding performance in the field and earn good reputation amount technicians and patients.
2, We have already passed the CE and ISO certification.
I’m sure that our factory is good enough for your program in your market.
Welcome any comments.
