Dental Implant Materials Super Translucent Zirconia Blocks Disc
Benefits:
Reduce preparation dramatically No need for porcelain Restoration seated firmly Eliminates the possibility of porcelain chipping No need to take out restoration under imaging medical examinations fast and efficient sintering technology Unique coloring changing effect No need for coloring liquids For open systems with different sizes such as Wieland, Sirona, Zirconzahn, Kavo, Lava, Amann Girrbach, Cercon, Dentmill etc.
Zirconia Block Introduction
Yurucheng zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp
Durability:Over 1600MPa perturbed strength, durable and useful
Zirconia Block Introduction
Yurucheng zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.
ST Color Zirconia Block
*Pre-shaded technics
*Uniform color
*Without post dyeing posses
*Suitable for full contour crown, bridge and anterior
Indications
Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior
Physical Characteristics
| Physical Characteristics |
| Sintered density 6.07±0.01g/cm³ |
| Bending Strength 1200 MPa |
| Transmittance 43% |
| Hardness 1200HV |
|
Sintering temperature 1480~1550℃/recommend 1530℃
|
HT/ST Sintering Curve (1-5)
| HT/ST Sintering Curve (1-5) |
| Sintering step |
Start Temperature(℃) |
End Temperature(℃) |
Time(Min) |
Rate(℃/Min) |
| Step 1 |
20 |
300 |
30 |
9.3 |
| Step 2 |
300 |
1200 |
150 |
6 |
| Step 3 |
1200 |
1530 |
110 |
3 |
| Step 4 |
1530 |
1530 |
120 |
0 |
| Step 5 |
1530 |
800 |
100 |
-7.3 |
| Step 6 |
800 |
natural cooling 20 |
120 |
-6.5 |
HT/ST Sintering Curve (10 units)
| HT/ST Sintering Curve (10 units) |
| Sintering step |
Start Temperature(℃) |
End Temperature(℃) |
Time(Min) |
Rate(℃/Min) |
| Step 1 |
20 |
300 |
30 |
9.3 |
| Step 2 |
300 |
1200 |
190 |
4.7 |
| Step 3 |
1200 |
1530 |
150 |
2.2 |
| Step 4 |
1530 |
1530 |
120 |
0 |
| Step 5 |
1530 |
800 |
120 |
-6 |
| Step 6 |
800 |
natural cooling 20 |
120 |
-6.5
|
Your message must be between 20-3,000 characters!
