|Name:||1530℃ Dental Zirconia Disc||Hardness:||1200HV|
|Sintering Temperature:||1530 ℃||Strength:||1200 MPa|
|Instrument Classification:||Class II||Sample:||Offer|
|Package:||OEM (dental Material)||Application:||Dental Areal, Dental Lab|
1200 MPa Dental Zirconia Disc,
1200HV Dental Zirconia Disc,
1530℃ Dental Zirconia Disc
Open system Dental Zirconia HT High Strength Zirocnia Block for Coping
Dental Zirconia Disc
To achieve expected quality, the sintering curves must be followed.
Note: please employ high-temperature furnace specially designed for denture manufacturing. It is good for ceramics sintering to prolong heating up time and cooling time properly.
1. Sintering preparation: Make sure there is enough sintering space to avoid deformation. After dyeing, the restoration must be dried. Do not heat up too quickly for it might result in cracks. Make sure the dust-proof cover is put on the crucible to keep impurity away from restorations
2. After sintering: Following the instruction to lower temperature and take out restorations. Do not reduce furnace temperature too quickly to avoid cracks.
3.The highest temperature: the highest temperature will affect the translucency and dyeing results. Make sure the accurate temperature of every step. Sinter and preserve heat according to the instruction.
High Translucency Dental Zirconia Disc For Anterior Restorarion , Dental Zirconia Blank
YUCERA blanks are made from biocompatible zirconiumdioxyde. The yttrium oxide stabilizing protects the material against cracks and increases the tensile and compressive strength. The special grain size allocation inside the material and the added aluminium oxide also result in extra strength during milling and subsequently in clinical use. The outstanding mechanical characteristics, excellent chemical durability and the unbeaten biocompatibility combined with the translucent color predestine XTCERA as the ideal material provider for dental milling systems.
YUCERA HT translucency, apply to single crown, anterior teeth, inlay/onlay and also veneers.
HT Dental Zirconia Disc
* High translucent
* Brilliant bending strength and economic block
* Suitable for coping and framework
Coping, Inlay, Onlay, Bridge, Crown
Sintered density 6.07±0.01g/cm³
Bending Strength 1200 MPa
Sintering temperature 1480~1550℃/recommend 1530℃