Stability Quality CAM CAD Dental Milling Machine Yucera Sk-5A 5 Axis Dental Milling Machine

 Stability Quality CAM CAD Dental Milling Machine Yucera Sk-5A Zirconia Dental Milling Machine For Lab

etailed specification of 5 axis dental milling machine:

Characteristics for 5 axis dental milling machine :

After 2 years of design and development,more than 100 dental labs tested, our Separation of mechanical and electrical control design to get unanimous praise:

1. Horizontal processing-speed can be increased by nearly 20%

2. simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;

3.Tool detection sensor with 2um

4.24hours on-line technical support
5.include hyperdent(free)

Advantage of Yucera 5 Axis dental milling machine:

Advantage of Yucera Sk-5A dental milling machine

1.The unique split design reduces the damage of dust to the main engine, makes maintenance easier, and increase the service life of the machine .

2.Horizontal milling machine put the center of gravity lower, so that the stability is higher, and the processing speed is increased by nearly 20%

3.Innovative C clamp design, compared with metal fixture, the utilization rate of zirconia blocks is increased by 30%

Please feel free to contact us for more information about the machine.

Open the package

Connect cutting machine,main machine and vacuum cleaner

Install the milling burs

Install zirconia block to the fixture

Starting the device

Horizontal center of gravity, faster and more stable

Five-axis linkage,

Daily dust maintenance

2.Why is Yucera-5A a split design?(Dental CAD CAM 5 Axis Milling Machine)?

Easy to maintain:

*When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;

*The control system is separated from the processing system to reduce the slight damage to the equipment caused by dust

3.How many teeth can SK-5A cut at one time?(Dental CAD CAM 5 Axis Milling Machine)

*38-40 units crown/bridge.

 Innovative fixture design, compared with a metal fixture, the utilization rate of porcelain blocks is increased by 30%

Introduction for 5 axis dental zirconia milling machine:

 Description for operation panel of 5 axis denal milling machine :

Description for working cabin of CAD CAM 5 axis dental milling machine:

Packaging for zirconia block: Each dental zirconia block will be packed into a box with protective ployfoam inside. Outside one more big carton with waterproof membrance.

Shipping: these zirconia block shipped by sea or by air.